> ## Content Index
> Fetch the complete content index at: https://knowledge.levelupcadcam.com/llms.txt
> Use this file to discover other available public pages before exploring further.

# MillBox CAM Video Library: Crown and Bridge, Screw-Retained, Strategy Editor
- URL: https://knowledge.levelupcadcam.com/millbox-cam-video-library-crown-and-bridge-screw-retained-strategy-editor/
- Published: 2026-09-17T16:12:43.000Z
- Updated: 2026-10-29T21:58:38.000Z
- Description: For MillBox users building their CAM skills, this library collects videos on crown and bridge and implant-supported workflows. Follow the suggested learning order, with Strategy Editor material for Expert users ready for advanced training.
- Author: Michael Webb
- Tags: MillBox, #freshdesk-154000245682, #migration-2026-09-09, MillBox:Tips

A curated set of short training videos to help you master everyday MillBox workflows. Start with Crown and Bridge, then move into Screw-Retained and Strategy Editor when you are ready.

## **Crown and Bridge Workflow**

### **Video 1: Crown and Bridge in MillBox**

In this walkthrough, Michael Webb shows the full CAM flow for single units and bridges. Follow along to see where each tool lives in the UI and how to keep nesting fast and clean.

**You will learn**

- Best practice import and orientation
- Smart pinning and connector placement
- Toolpath preview and simulation checks
- Simple fixes for common nesting issues

### **Video 2: Crown and Bridge Tips and Tricks**

Builds on the first video with time-saving ideas that make nesting easier and more consistent.

**You will learn**

- Faster selection and multi-part edits
- Queue management and file organization
- Practical tips for reliable outputs

## **Screw-Retained Cases**

### **Screw-Retained Workflow Overview**

Covers MillBox’s approach for screw-retained cases including All-on-X, special screw seats and angled channels.

**You will learn**

- Object type selection for screw-retained designs
- Setting and verifying the cavity axis
- Seat geometry and access alignment checks

## **Strategy Editor**

### **Intro to Strategy Editor**

Strategy Editor lets you adjust strategy templates and cutting parameters for your machine and toolset.

**You will learn**

- Where to find and duplicate a base strategy
- Safe edits for feeds, passes and stepdowns
- How to test changes on a sample before production

**Note:** Strategy Editor is part of MillBox Expert. If you cannot open these settings, contact Level Up Support to enable a trial or upgrade your dongle.

Email: [support@levelupcadcam.com](mailto:support@levelupcadcam.com)

## **Hybrid Abutment and Screw-Retained**

### **Hybrid Abutment and Screw-Retained Workflow**

Alex from CIMsystem explains key requirements and steps for reliable hybrid abutments and screw-retained restorations.

**You will learn**

- Library and interface selection
- Replace flow tips and verification
- Thickness and connector checks before milling

## **Special Screw Seats for Implants**

### **Configuring Powerball, Rosen, SegScrew and more**

Yago Leal from CIMsystem shows how to configure CAM for custom screw designs and mill them correctly.

**You will learn**

- Seat definitions and parameter choices
- Strategy implications for each screw type
- Simulation cues that confirm a good setup

## **Suggested order**

1. Crown and Bridge in MillBox
2. Crown and Bridge Tips and Tricks
3. Screw-Retained Workflow Overview
4. Hybrid Abutment and Screw-Retained Workflow
5. Special Screw Seats for Implants
6. Intro to Strategy Editor

## **Quick checklist**

- Latest stable MillBox build installed
- Correct object type selected before nesting
- Simulation run and checked before export
- For Strategy Editor changes, test on a small sample first

## **Need Further Help?**

Still need support? Reach out via our[ Support Portal](https://support.levelupcadcam.com/?ref=knowledge.levelupcadcam.com) or email us at [**support@levelupcadcam.com**](mailto:support@levelupcadcam.com).

We’re here to help you Level Up.